LPM-2M-E

LPM-2M-E Specifications include; Stepping & Continuous mode of operation, 10 mm travel, >4 N force, min step size just 2.6 µm, response time 20 µsec to 30 µsec, weighs just 25 g.

Description

The LPM-2M-E linear piezo motor represents a quantum leap in design of small high-performance DC motors. Injection-molded using extremely durable, but light weight engineered reinforced thermoplastics, the LPM-2M-E provides low cost with superior precision and ultra fast response/start-stop characteristics. Highly energy efficient, the LPM-2M-E consumes zero power in hold position while still providing significant force. Available in a variety of configurations (including non-magnetic) the LPM-2M-E is the ideal choice for high volume demanding OEM applications where superior performance and economical unit cost are important factors. Close loop control of the motor is achieved via an optical encoder mounted on the back of the motor. This provides 2.6 µm close loop resolution. Encoder communication electronics consist of a daughter board (pcb) mounted on the main driver board. The encoder electronics includes a serial (RS-232) port. Optional PLC software/GUI enables control of the motor using Windows®10 or earlier.

Mode of Operation Stepping & Continuous
Push/Pull Force >4N
Self-braking Force >4N
Velocity Range (Stepped to continuous) >0.014 mm/s to 140 mm/s
Travel Range 10 mm
Minimum Linear Step <2.6 µm
Dynamic Range 4 kHz
Supply Voltage for Driver 12 VDC
Operating Temperature -20° to 80°C
Operating Current @ max speed 40 mA to 350 mA
Motor Weight with encoder 25 g
Motor Dimensions w/ encoder (mm) 39.5 x 36.3 x 11.1 mm
Driver PCB Dimensions (mm) 48 x 63 x 25 mm
Encoder Type Optical

*Contact DTI for further information

Request Information

If you would like to receive more information or discuss this product, please contact us via the form below.

Ordering Information

Description Part No.
Evaluation kit (Incl. motor, driver PCB, cables, 12 VDC adapter) C26-2M-EK
Evaluation kit with Encoder C26-2M-EK-E
Non-Magnetic Evaluation kit C26-2M-EK-S
Non-Magnetic Evaluation kit w/Encoder C26-2M-EK-E-S
OEM Motor w/Connector C26-2M-C
OEM Motor w/Wire C26-2M-W
OEM Motor with Encoder with Connector C26-2M-C-E
OEM  Motor with Encoder w/wire C26-2M-W-E
OEM Non-Magnetic Motor w/Connector C26-2M-C-S
OEM Non-Magnetic Motor w/Wire C26-2M-W-S
OEM Non-Magnetic Motor w/Encoder w/Connector C26-2M-C-E-S
OEM Non-Magnetic Motor w/Encoder w/Wire C26-2M-W-E-S
Electronic driver PCB OEM C26-SDA
Electronic driver PCB w/Encoder daughter board OEM C26-SDA-E
Electronic driver PCB Enclosure C26-SDA-B
Electronic driver PCB w/Encoder daughter board w/Enclosure C26-SDA-E-B
PLC software/GUI Windows® SW26-5M