PM-1124R-SS-E

Specifications include; >30 mN.m torque (>40 mN.m holding torque), min angular step 196 µrad, max speed >100 rpm, dynamic range 4kHz, weighs 130 g.

Description

The PM-1124R-SS-E linear piezo motor represents a quantum leap in design of small high-performance DC motors. Injection-molded using extremely durable, but light weight engineered reinforced thermoplastics, the PM-1124R-SS-E provides low cost with superior precision and ultra fast response/start-stop characteristics. Highly energy efficient, the PM-1124R-SS-E consumes zero power in hold position while still providing significant torque. Available in a variety of configurations (including non-magnetic) the PM-1124R-SS-E is the ideal choice for high volume demanding OEM applications where superior performance and economical unit cost are important factors. Close loop control of the motor is achieved via an optical encoder mounted on the back of the motor. This provides 196 µrad close loop resolution. Encoder communication electronics consist of a daughter board (pcb) mounted on the main driver board. The encoder electronics includes a serial (RS-232) port. Optional PLC software/GUI enables control of the motor using Windows®10 or earlier.

Mode of Operation Stepping & Continuous
Maximum Torque ≥30 mN.m
Self-braking Torque ≥40 mN.m
Maximum Speed ≥100 rpm
Minimum Angular Step 196 µrad
Dynamic Range 4 kHz
Supply Voltage for Driver 12 VDC
Operating Temperature -20° to 80°C
Operating Current (over velocity range) 40 mA to 350 mA
Motor Weight with encoder 130 g
Motor Dimensions with encoder (mm) 65.9 x 51.8 x 43.4
Driver PCB Dimensions (mm) 48 x 63 x 25 mm
Encoder Type Optical

*Contact DTI for further information

Additional information

Data Sheet

Link

Request Information

If you would like to receive more information or discuss this product, please contact us via the form below.

Ordering Information

Evaluation kit (Incl. motor, driver PCB, cables, 12 VDC adapter) C25-4RSS-EK
Evaluation kit with Encoder C25-4RSS-EK-E
Non-Magnetic Evaluation kit C25-4RSS-EK-S
Non-Magnetic Evaluation kit w/Encoder C25-4RSS-EK-E-S
OEM Motor w/Connector C25-4RSS-C
OEM Motor w/Wire C25-4RSS-W
OEM Motor with Encoder with Connector C25-4RSS-C-E
OEM  Motor with Encoder w/wire C25-4RSS-W-E
OEM Non-Magnetic Motor w/Connector C25-4RSS-C-S
OEM Non-Magnetic Motor w/Wire C25-4RSS-W-S
OEM Non-Magnetic Motor w/Encoder w/Connector C25-4RSS-C-E-S
OEM Non-Magnetic Motor w/Encoder w/Wire C25-4RSS-W-E-S
Electronic driver PCB OEM C26-SDA
Electronic driver PCB w/Encoder daughter board OEM C26-SDA-E
Electronic driver PCB Enclosure C26-SDA-B
Electronic driver PCB w/Encoder daughter board w/Enclosure C26-SDA-E-B
PLC software/GUI Windows® C26-4RSW